由于学业问题（但很可能这并非主要原因，只是借口罢了），钻研的精神也近乎消失了。在搭建项目时主打一个“能用就行”，不像曾经的我一样能花数天时间攻克一个微小的bug。例如我对现在的博客主题早已有一些不满意的地方，如博文标题字体过大，以及splash screen风格不太喜欢，但我却没有采取什么措施，放任它留到了现在……也许明年我会尝试改进工作流（Notion or Obsidian？），更换博客系统以及主题吧，虽然我一直不擅长一些个性化设置，例如各个社交网络账户上的头像，每次都要绞尽脑汁翻相册找到数张看着顺眼的拿来使用；
rem 先查询你的盘所对应的编号 SeaChest_PowerControl_x64_windows.exe --noBanner --scan rem 此处我的盘编号为`PD0`，然后使用如下命令，查看现有的EPC设置 SeaChest_PowerControl_x64_windows.exe --noBanner -d PD0 --showEPCSettings
===EPC Settings=== * = timer is enabled C column = Changeable S column = Savable All times are in 100 milliseconds
Name Current Timer Default Timer Saved Timer Recovery Time C S Idle A *10 *10 *10 1 Y Y Idle B 0 *6000 0 4 Y Y Idle C 0 18000 0 25 Y Y Standby Z 0 0 0 55 Y Y
@echo off title Seagate Disk EPC Manipulator ver 1.0.1
set sleep_on=--idle_b13000--idle_c13500--standby_z18000 set sleep_off=--idle_b0--idle_c0--standby_z0 rem [!] How to get diskNumber? run SeaChest_PowerControl_x64_windows.exe --scan! set diskNo=PD0 set delayedExitAfterDone=y set delaySeconds=600
@echo on @if"%cmd%" NEQ "null" ( echo Command to be run: SeaChest_PowerControl_x64_windows.exe %cmd% @echo off timeout -t1 "C:\Program Files\Seagate\SeaChest\SeaChest_PowerControl_x64_windows.exe"--noBanner %cmd% if"%delayedExitAfterDone%" NEQ "y"exit /b echo Waiting %delaySeconds% before exit... timeout -t %delaySeconds% exit /b ) @echo off echo Command Not Supported! echo Usage: seagate-manipulate-disk.bat [sleep-on / sleep-off] echo Before Use, remember to set proper value in this file! timeout -t2 exit /b
echo IPv6 Check script is online now. whiletrue; do if ! ping6 -c 1 -W 1 2001:da8::666 >/dev/null; then echo $(date +'%Y-%m-%d %H:%M:%S') reconnecting IPv6...
# Get traffic data TX&RX from ifconfig for eth0 interface eth0_data=$(ifconfig eth0 | grep -oE 'RX.*TX.*' | sed -n 's/.*RX bytes:[0-9]\+ (\([0-9.]\+ GiB\)) TX bytes:[0-9]\+ (\([0-9.]\+ GiB\)).*/RX: \1 TX: \2/p') # Get traffic data TX&RX from ifconfig for pppoe-wan interface pppoe_wan_data=$(ifconfig pppoe-wan | grep -oE 'RX.*TX.*' | sed -n 's/.*RX bytes:[0-9]\+ (\([0-9.]\+ GiB\)) TX bytes:[0-9]\+ (\([0-9.]\+ GiB\)).*/RX: \1 TX: \2/p') # Concatenate the two interfaces' traffic data into a single string all_traffic="[Current Traffic] WAN-all[${eth0_data}] WAN4[${pppoe_wan_data}]"
(effective for repos whose remote is in https protocol, check with git remote -v)
3.3 为ssh配置socks5代理
set socks5 proxy for ssh in user config file
Add following line in your .ssh/config file:
1 2 3 4 5
Host github.com User git IdentityFile ~/.ssh/id_rsa # ProxyCommand nc -X 5 -x 127.0.0.1:1080 %h %p # if `nc` is installed ProxyCommand connect -S 127.0.0.1:1080 %h %p # for git bash on windows
And remind that ‘connect’ maybe not in your PATH so cannot be executed directly, you can find it in your git installation directory, like C:\Program Files\Git\mingw64\bin\connect.exe, and use that path to replace the single connect in above commands.
注1：我没想到PotPlayer是我尝试失败的罪魁祸首，由于前者是我PC上的默认播放软件，我也就一直使用它，结果使用上述软件以及MMSSTV均无法得到清晰可辨的图像（字符极其模糊，只有个别字母和大赛logo可见），就在我想要发送邮件询问的一刹那，我换用了Windows Media Player，结果居然可以得到清晰图像！这一问题我至今不知道原因为何。（已检查PotPlayer倍速设置为1.0）
#!/bin/bash # Define the target directory where .git/objects is located GIT_OBJECTS_DIR=".git/objects"
# Iterate through the two-hex-named directories fordirin $(find "$GIT_OBJECTS_DIR" -type d -name "??"); do dir_name=$(basename"$dir")
# Iterate through object files in the directory for obj_file in"$dir"/*; do # Combine directory name with object filename combined_path="$dir_name$(basename "$obj_file")"
# Execute your command with the combined path git cat-file -p "$combined_path" | grep 'flag' done done
]]><p>以此文记录一次本人在一台安装了Debian系操作系统的VPS上搭建带伪装的naiveproxy的过程。</p>
<p>（补充介绍）NaïveProxy使用Chrome的网络栈，所以防火墙截获的流量行为与Chrome和标准前端服务器（如Caddy、HAProxy）之间的常规HctBridgeBot Wiki (Lite)https://blog.eddy.moe/2023/08/01/CTBR_Docs1/2023-08-01T02:54:00.000Z2024-10-10T09:53:00.215Z本程序助您桥接Telegram和WeChat、互通消息，且提供最大化的自定义性！
// This is a device-specific proxy setting, which is used to bypass the firewall. // When updating the code, you could make no change to this file. // =====================================================================
// Please write your HTTP proxy with patterns below, eg. NekoRay // module.exports = "http://127.0.0.1:7080" ;
// Or, If you don't want to use proxy at all, just keep empty: module.exports = "" ;
图片消息将会先被下载到/downloaded/photo中，以${消息发出者alias}-${wxdata.filename}形式保存，再发送到其对应的接收对象中，并且这些图片的标题（caption，即图片下方出现的文字）显示为 ‘ from 发送者名称 ’（规则同上述a，根据是否为群/是否为C2C拥有不同行为）
本程序支持交互式查找聊天对象，具体方法是直接发送/find指令，在得到程序反馈Entering find mode; enter token to find it.后，直接输入您想要查找的对象的微信昵称/群名称/您设置的备注，（由于UOS微信的限制，完成此步骤需要数秒）在查找成功后将会回复消息Found Person: name=……，此时若“聊天对象”锁未启用，则“上一个聊天对象”也会被设置成当前查找到的目标。
]]><p>本程序助您桥接<code>Telegram</code>和<code>WeChat</code>、互通消息，且提供最大化的自定义性！</p>
<h2 id="一-部署指南"><a href="#一-部署指南" class="headerlink" title="一. 部署指PC2系统修复与升级Archhttps://blog.eddy.moe/2023/03/30/PC2%E7%B3%BB%E7%BB%9F%E4%BF%AE%E5%A4%8D%E4%B8%8E%E5%8D%87%E7%BA%A7Arch/2023-03-30T07:43:33.000Z2024-04-28T16:14:36.105Z（As this is outdated, I want to move things from my TG channel to here.）
All of this are caused by a failed SSD.First I discovered data loss, in the form of I/O Error, then after recovering ext4 files to Windows PC, the Disk suddenly got corrupted and the system won’t boot! My next step was e2fsck, which lead to a situation that all existing files were moved to “lost+found” and lost their filenames. Then I tried a lot to move recovered file back to disk, after many tries, the files got back, the grub was reinstalled again, but it still failed to boot, with the missing of so many files such as “vmlinuz”.
After that, I executed Ubuntu installer to overwrite system files to the existing partition. To be short, the system booted up, but all my apps are corrupted, only left error shortcuts on the Desktop. OK, so I tried re-copy recovered file from Win PC to the previous partition, and selected overwrite on conflict. Now some of my apps recovered, however, the system was Inoperable, maybe some system files are replaced with corrupted ones. So, the last option for me is install a new Operating system.
Then, I installed centos, without much meaningless tries(excluded many tries to compile VMware kernel modules that I finally get rescued by a patch.sh on Github ) However, its kernel cannot support btrfs ?! It is said that RedHat removed this feature on Centos 8, and I could not find any working method to install that, even after I downloaded the source of btrfs-progs and tried to compile them. I was, emm, heartbroken, so after the evening class on Monday, I spent 2 hours on Arch Linux Installer, with almost no errors reported. Thanks to the Arch Wiki, I learned some inner principle of linux kernel, and put all things back online. I have to say that Arch is an OS of freedom, it gave me many choices on Packages, Desktop Environment and so.
Now I installed Budgie (its freedom on docks and panels help me a lot) as my normal Desktop Environment. Welcome other budgie users!!
]]><p>（As this is outdated, I want to move things from my TG channel to here.）</p>
<p><img
lazyload
宝塔面板反向代理的缓存功能如何彻底关闭https://blog.eddy.moe/2023/03/17/%E5%AE%9D%E5%A1%94%E9%9D%A2%E6%9D%BF%E5%8F%8D%E5%90%91%E4%BB%A3%E7%90%86%E7%9A%84%E7%BC%93%E5%AD%98%E5%8A%9F%E8%83%BD%E5%A6%82%E4%BD%95%E5%BD%BB%E5%BA%95%E5%85%B3%E9%97%AD/2023-03-17T06:32:30.000Z2024-04-28T16:15:35.369Z今日尝试使用宝塔面板的反向代理功能给bark-server添加https加密，但是却频繁遭遇“缓存危机”，依据宝塔程序的默认设置可以推出，缓存有效时长应为12h，这在某些场合下未免太长了些。但我改了面板上显示的缓存设置（如图）未有改变：
int count = 1, t_length = 0; char outputBuffer[MAXSIZE] = {}; cout << endl << "General Instructions:" << endl; cout << "Now please enter dna pairs, first is of the virus, the second is person's." << endl; cout << "To Interrupt inputting, please enter 'z z' on a new line and then press enter." << endl << flush; while (true) { char s[MAXSIZE] = {}, t[MAXSIZE] = {}, t_part[MAXSIZE] = {}; //Processing one pair of DNA in one circulation cin >> t; cin >> s; if (s[0] == 'z' && t[0] == 'z') { //User Ready to view results cout << outputBuffer << endl; break; } t_length = strlen(t); //Double the pattern string sprintf(t, "%s%s", t, t); bool BFResult = false, KMPResult = false; for (int i = 0; i < t_length; i++) { int nextv[MAXSIZE]; get_next(t, nextv); //get each {t_length}characters of T string substr(t, i, t_length, t_part); //Used logical short-circuit, to avoid useless computing since first success in t_part BFResult = BFResult (Index_BF(s, t_part) != -1); KMPResult = KMPResult (Index_KMP(s, t_part, nextv) != -1); } sprintf(outputBuffer, "%s -The %d(th) , By BF:{%s}, By KMP:{%s}\n", outputBuffer, count++, BFResult ? "Yes" : "No ", KMPResult ? "Yes" : "No "); }
#include <iostream> using namespace std; #define MAXSIZE 255 int substr(char input[], int start, int length, char output[]) { if (start < 0 start > strlen(input) length < 0 start + length - 1 > strlen(input)) return 0; for (int i = start; i < start + length; i++) output[i - start] = input[i]; return 1; }
int Index_BF(char S[], char T[]) { int i = 0, j = 0; int lenS = (int) strlen(S), lenT = (int) strlen(T); while (i < lenS && j < lenT) { if (S[i] == T[j]) { i++, j++; } else { i = i - j + 1; j = 0; } } return (j >= lenT) ? i - lenT : -1; } void get_next(char t[], int nextv[]) { // t2 is used to change the pattern string to start from index 1, not 0. char t2[MAXSIZE] = {0}; for (int m = 0;; m++) { t2[m + 1] = t[m]; if (t[m] == 0) break; } int i = 1, j = 0; nextv[1] = 0; while (i < strlen(t)) { if (j == 0 t2[i] == t2[j]) { i++, j++; nextv[i] = j; } else { j = nextv[j]; } } } int Index_KMP(char S[], char T[], int nextv[]) { int i = 1, j = 1; char s2[MAXSIZE] = {0}, t2[MAXSIZE] = {0}; for (int m = 0;; m++) { t2[m + 1] = T[m], s2[m + 1] = S[m]; if (T[m] == 0) break; } int lenS = (int) strlen(S), lenT = (int) strlen(T); while (i <= lenS && j <= lenT) { if (j == 0 s2[i] == t2[j]) { i++, j++; } else { j = nextv[j]; } } return (j > lenT) ? i - lenT : -1; } int main() { int count = 1, t_length = 0; char outputBuffer[MAXSIZE] = {}; cout << endl << "General Instructions:" << endl; cout << "Now please enter dna pairs, first is of the virus, the second is person's." << endl; cout << "To Interrupt inputting, please enter 'z z' on a new line and then press enter." << endl << flush; while (true) { char s[MAXSIZE] = {}, t[MAXSIZE] = {}, t_part[MAXSIZE] = {}; //Processing one pair of DNA in one circulation cin >> t; cin >> s; if (s[0] == 'z' && t[0] == 'z') { //User Ready to view results cout << outputBuffer << endl; break; } t_length = strlen(t); //Double the pattern string sprintf(t, "%s%s", t, t); bool BFResult = false, KMPResult = false; for (int i = 0; i < t_length; i++) { int nextv[MAXSIZE]; get_next(t, nextv); //get each {t_length}characters of T string substr(t, i, t_length, t_part); //Used logical short-circuit, to avoid useless computing since first success in t_part BFResult = BFResult (Index_BF(s, t_part) != -1); KMPResult = KMPResult (Index_KMP(s, t_part, nextv) != -1); } sprintf(outputBuffer, "%s -The %d(th) , By BF:{%s}, By KMP:{%s}\n", outputBuffer, count++, BFResult ? "Yes" : "No ", KMPResult ? "Yes" : "No "); } return 0; }
Thanks for reading!
]]><p>本程序实现了基于字符串匹配的病毒序列检测功能。<br>主体由两大字符串匹配算法的实现函数、自制的substr函数，以及KMP中的get_next函数组成。</p>
<div class="code-container" data-rel="Plaintext"><figurHello, World!https://blog.eddy.moe/2022/12/13/hello-world-1/2022-12-13T12:38:19.000Z2023-10-10T08:24:56.800ZThis is my first passage, now roughly acting as a brief self-introduction!
About me : A college sophomore majoring in CS in Anhui University..
Interested in :
Java (Very complex, uh-huh?)
C/C++ (the must-have for normal CS students)
PHP (the best language in the world ! )
Python (No Py at all ! )
Node.js (It’s very easy for it to start a simple project)
